KX15DT

KX15DT (Grade 2)

Digital Combined PIR and Microwave Detector

  • Dual element pyro-electric sensor
  • X-band DRO based microwave
  • 15m detection range
  • Selectable EOL (End Of Line) resistors
  • AND/OR technology
  • Patented Independent Floating Thresholds (IFT)
  • Blue wave technology
  • Auto sensitivity feature
  • Digital temperature compensation
  • Triple LED indication
  • Frequency options
  • Sealed optics
  • Tamper proof brackets included
  • ABS plastics
  • Tested and Certified to EN 50131-2-4

COMMERCIAL / RESIDENTIAL

Product Features

Features Description
15m Volumetric detector 15m Volumetric detection coverage. Ideal for protection of rooms, offices etc.
Selectable EOL resistors The detectors incorporates selectable alarm resistor values of 6K8, 5K6, 4K7 &1K & tamper values of 5K6, 4K7, 2K2 and 1K catering for most control panels on the market.
AND/OR technology AND’ mode operates as a standard dual technology detector. ‘OR’ mode will switch to microwave detection in environments where there is a risk of PIR detection being blocked,
Blue wave technology This technology further enhances the detector’s immunity to infra-red noise in the environment. BWT comprises of 2 key components: 1). The new 3D optics system enables perfect focusing of the infra-red signal onto the pyro-electric sensor. This allows BWT to clearly identify the positive and negative signal edges. 2). Powerful software embedded into a microprocessor is used to process the received information from the pyro-electric sensor. The result of this combination is lower infra-red signal noise amplification and therefore better immunity.
Auto sensitivity feature Depending on the environment condition, the detector will automatically adjust the sensitivity
Digital Temperature Compensation When the product is used in a hot environment this technology digitally adjusts the detector’s sensitivity allowing it to maintain its range even when the background room temperature is almost equal to the external body temperature of 32ºC (internal body temperature = 37ºC)
Active self test If there is no activation after a 5 hour period it will actually self test both the PIR and microwave
Triple LED indication Microwave – orange, PIR – green, alarm – blue. (KX15DTAM – Blue flashing = mask)
Microwave Frequencies Bands 3 different frequency bands to avoid interference between detectors are installed in the same room

Lens Coverage

KX15DT

Lens-KX15DT

Technical Specification

 

ELECTRICAL
Operating voltage 9-16VDC (12V nominal)
Current consumption – no alarm 23mA
Current consumption – alarm 30mA
Relay Solid state
Relay output 60VDC, 50mA Protected
Tamper switch 12V max, 50mA max
RFI immunity to continuous wave (CW) 80-2700MHz 10 V/m
RFI immunity to amplitude modulation (AM) 80-2700MHz 10 V/m
RFI immunity to pulse modulation (PM) 80-2700MHz 10 V/m
DTI approved frequenices 10.680, 10.587, 10.695GHz
FCC approved frequencies 10.515, 10.525, 10.535GHz
PIT approved frequencies 9.87, 9.90, 9.91GHz

 

PHYSICAL
Dimensions 117x69x50mm
Weight 105g

 

OPERATING FEATURES
Alarm period of 2.5 seconds
Detection speed 0.3 – 3m/s
Operating temperature -30
Storage temperature -40

 

OPTICAL
White light filter 6500 Lux
Optics Sealed
Lens 3 Dimensional
Protection Ultraviolet Light Filter

 

MOUNTING
Optimum coverage height (dual Tech) 1.8-2.4m
Optimum coverage height (vertical curtain) 1.8-4.0m
Optimum coverage height (long range) 1.8-2.4m